SmartReader Plus 3 Accessories

SmartReader Plus Data Loggers require the BP-101 Battery pack to log at rates faster than once every 8 seconds. A male stereo jack and cable plugs directly into the communication port on the logger. Uses 4 AAA batteries (included) and are user replaceable.

Use to spot-check readings and verify sensors are hooked correctly to Data Loggers in the field. Ordering Information Model Description Catalog # Order SRP-DM Display Module, SmartReader Plus 01-0171 Buy Now   Power Supply, North America 33-0015 Buy Now   Power Supply, United Kingdom 33-0017 Buy Now   Power Supply, Europe 33-0016 Buy Now   Power Supply, Australia 33-0014 Buy Now ...

To easily log AC Current, simply clamp the ACR Current Probe around the electric lead. No wiring required, permitting safe and reliable operation. Operating amperage ranges are switch selectable.

To easily log AC Current, simply clamp the ACR Current Probe around the electric lead. No wiring required, permitting safe and reliable operation. Operating amperage ranges are switch selectable.

To easily log AC Current, simply clamp the ACR Current Probe around the electric lead. No wiring required, permitting safe and reliable operation. Operating amperage ranges are switch selectable.

To easily log AC Current, simply clamp the ACR Current Probe around the electric lead. No wiring required, permitting safe and reliable operation. Operating amperage ranges are switch selectable.

To quickly monitor the AC current in-line on any convenience outlet, simply plug the splitter in between the outlet and equipment that is being monitored. For monitoring very small loads, there is a 10x multiplier slot for increased sensitivity. No wiring. Safe to use.

To quickly monitor the AC current in-line on any convenience outlet, simply plug the splitter in between the outlet and equipment that is being monitored. For monitoring very small loads, there is a 10x multiplier slot for increased sensitivity. No wiring. Safe to use.

Converts a 120VAC, 60Hz power systems to a proportional 0 to 5 volt DC output.

Converts a three phase, 600 VAC, 60 Hz power system to three proportional 0 to 5 volt DC outputs. (Not exactly as shown.)

When multiple external sensors are connected to a SmartReader or SmartReader Plus Data Logger, this strain relief easily snaps on to the connector and locks all the wiring connections to the terminal block.

Leave terminal blocks connected to your sensors. No need to rewire your sensors in every time you use your data logger at a different location. Convenient and time saving.

Connect a SmartReader, SmartReader Plus or Nautilus to a Female DB9 Serial Port. Features: Convenient easy-to-connect Data Logger plug Easy troubleshooting  - echos characters for cable detection Attaches directly to SmartReader Plus network Benefits: No cumbersome connectors or special tools needed No special drivers or interface requirements  Lowest common denominator for hooking to serial devices  

Connect a SmartReader, SmartReader Plus or Nautilus to Universal Serial Bus Port.  Features: Convenient easy-to-connect Data Logger plug Driver registered with Microsoft - automatic cable detection Powers SmartReader Plus network directly from connection Benefits: No cumbersome connectors or special tools needed No agravating drivers to load or separate disks required No external power supply needed for multiple data loggers To download and install the latest driver for the IC-102 cable, click here.

Allows SmartReader Plus to be networked using 3 wire stereo cable.

Allows SmartReader Plus Data Loggers to be networked using standard telephone cable.

Required when network length is greater than 50' or more than three loggers are on the network. Also works as a power supply for fast sampling with any SmartReader Plus.

Required when network length is greater than 50' or more than three loggers are on the network. Also works as a power supply for fast sampling with any SmartReader Plus.

External modem for use on the PC factory programmed for communication with ACR Data Logger Networks.

Factory programmed external modem for use on an ACR Data Logger Network.

Required to link a single SmartReader Data Logger to a modem. Also required on any SmartReader Plus remote network. Adapts between the IC-101 and modem.

Protects loggers from dust and debris while allowing air flow to the logger. ideal for relative humidity loggers.

Ideal for wet or other environments where condensation or other contaminants may contact the Data Logger. Has a metal backing inside to allow the logger to suspend magnetically inside. One external connection sealing system is supplied permitting use of external probes with logger. NEMA 4X rated. Recommended for 1 but may hold up to 3 data loggers.

Use with the Weatherproof box to connect additional external sensors to a SmartReader or SmartReader Plus logger. Will seal up to a 1/4 inch diameter cable.

Protects the SmartReader stereo jack from dirt and debris.

The Alarm Module plugs into any SmartReader Plus data port to optically and acoustically indicate the logger has exceeded a threshold setting as setup by the user. There is also a N/O and N/C relay which can be used for other indication devices. Requires a 5 volt power supply (included). Product Specifications

The Alarm Module plugs into any SmartReader Plus data port to optically and acoustically indicate the logger has exceeded a threshold setting as setup by the user. There is also a N/O and N/C relay which can be used for other indication devices. Requires a 5 volt power supply (included). Product Specifications

A convenient way to protect and organize your ACR Data Logger investment. Rugged and stylish, the case is made from Polystyrene for years of solid protection. The inside layout can be customized since the foam is die cut. Key locks provide added security. Can hold up to 21 data loggers plus accessories.