SmartReader Plus 4 LPD Accessories

SmartReader Plus Data Loggers require the BP-101 Battery pack to log at rates faster than once every 8 seconds. A male stereo jack and cable plugs directly into the communication port on the logger. Uses 4 AAA batteries (included) and are user replaceable.

Use to spot-check readings and verify sensors are hooked correctly to Data Loggers in the field. Ordering Information Model Description Catalog # Order SRP-DM Display Module, SmartReader Plus 01-0171 Buy Now   Power Supply, North America 33-0015 Buy Now   Power Supply, United Kingdom 33-0017 Buy Now   Power Supply, Europe 33-0016 Buy Now   Power Supply, Australia 33-0014 Buy Now ...

Connects to most SmartReader Plus pressure sensors/modules. Compatible with SR4, SRP4 up to 100 PSI.

Connects to most SmartReader or SmartReader Plus pressure sensors/modules.

With its wide range, it is ideal for sensing temperature in most applications. The temperature sensor is housed inside a stainless steel tip for fast response time.

Convenient and easy to install, it wraps around any pipe less than 2in(5cm) diameter. Fastens to any pipe with its Velcro® strapping system. No tools required.

A simple external sensor used to monitor skin temperature on humans and animals. To mount the sensor, simply use medical tape to adhere the sensor on to the skin of the subject.

For applications where the center of the temperature sensing point will be approximately 0°C. The temperature sensor is housed inside a stainless steel probe for fast response time.

For applications where the center of the temperature sensing point will be approximately 0°C. The temperature sensor is housed inside a stainless steel probe for fast response time.

For applications where the center of the temperature sensing point will be approximately 80C. The temperature sensor is housed inside a stainless steel tip for fast response time.

Temperature Probe For applications where the center of the temperature sensing point will be approximately 150°C. The temperature sensor is housed inside a tiny stainless steel tip for fast response time.

When multiple external sensors are connected to a SmartReader or SmartReader Plus Data Logger, this strain relief easily snaps on to the connector and locks all the wiring connections to the terminal block.

Leave terminal blocks connected to your sensors. No need to rewire your sensors in every time you use your data logger at a different location. Convenient and time saving.

Connect a SmartReader, SmartReader Plus or Nautilus to Universal Serial Bus Port.  Features: Convenient easy-to-connect Data Logger plug Driver registered with Microsoft - automatic cable detection Powers SmartReader Plus network directly from connection Benefits: No cumbersome connectors or special tools needed No agravating drivers to load or separate disks required No external power supply needed for multiple data loggers To download and install the latest driver for the IC-102 cable, click here.

Allows SmartReader Plus to be networked using 3 wire stereo cable.

Allows SmartReader Plus Data Loggers to be networked using standard telephone cable.

Required when network length is greater than 50' or more than three loggers are on the network. Also works as a power supply for fast sampling with any SmartReader Plus.

Required when network length is greater than 50' or more than three loggers are on the network. Also works as a power supply for fast sampling with any SmartReader Plus.

Required to link a single SmartReader Data Logger to a modem. Also required on any SmartReader Plus remote network. Adapts between the IC-101 and modem.

Protects loggers from dust and debris while allowing air flow to the logger. ideal for relative humidity loggers.

Ideal for wet or other environments where condensation or other contaminants may contact the Data Logger. Has a metal backing inside to allow the logger to suspend magnetically inside. One external connection sealing system is supplied permitting use of external probes with logger. NEMA 4X rated. Recommended for 1 but may hold up to 3 data loggers.

Use with the Weatherproof box to connect additional external sensors to a SmartReader or SmartReader Plus logger. Will seal up to a 1/4 inch diameter cable.

Protects the SmartReader stereo jack from dirt and debris.

The Alarm Module plugs into any SmartReader Plus data port. Used with the alarm dialout capabilities of SmartReader Plus data loggers to provide an audio and visual alarm. There is also a N/O and N/C relay which can be used for other indication devices. Requires a 5 volt power supply (included). Product Specifications

The Alarm Module plugs into any SmartReader Plus data port. Used with the alarm dialout capabilities of SmartReader Plus data loggers to provide an audio and visual alarm. There is also a N/O and N/C relay which can be used for other indication devices. Requires a 5 volt power supply (included). Product Specifications

A convenient way to protect and organize your ACR Data Logger investment. Rugged and stylish, the case is made from Polystyrene for years of solid protection. The inside layout can be customized since the foam is die cut. Key locks provide added security. Can hold up to 21 data loggers plus accessories.