FAQ
Frequently Asked Questions (FAQs) for ACR Systems data loggers and other products.
Product FAQs
- General FAQ
Frequently Asked Questions - JR-1000 FAQ
Frequently Asked Questions for JR-1000/JR-1001 data logger - Nautilus FAQ
Frequently Asked Questions for the Nautilus data logger - OWL FAQ
Frequently Asked Questions for OWL data loggers - SR1/SR8 and SRP1/SRP8 FAQ
Frequently Asked Questions for SmartReader 1 and 8, and SmartReader Plus 1 and 8 - SR2/SRP2 FAQ
Frequently Asked Questions for SR2, SRP2 - SR3/SRP3 FAQ
Frequently Asked Questions for SR3 and SRP3 - SR4/SRP4 FAQ
Frequently Asked Questions for SmartReader 4, SmartReader Plus 4, and SmartReader Plus 4 LPD - SR5 and SRP5/SRP6 FAQ
Frequently Asked Questions for SmartReader 5 and 6, and SmartReader Plus 5 and 6 - SR7/SRP7 FAQ
Frequently Asked Questions for SmartReader 7 and SmartReader Plus 7 - SR9/SRP9 FAQ
Frequently Asked Questions for SmartReader 9 and SmartReader Plus 9 - SRP10 FAQ
Frequently Asked Questions for SmartReader Plus 10 - TrendReader 2 FAQ
Frequently Asked Questions for TrendReader 2 - PowerWatch FAQ
Frequently Asked Questions for PowerWatch Voltage Disturbance Recorders
Software
- ACR Software Compatibility with Windows 7 FAQ
Using ACR Software with Windows 7 - Calculating Average Values
Using a Compound Line to Apply Average Value Calculations - Calculating Mean Kinetic Temperature
Applying MKT as a Compound Line - Configuring TrendReader 2 for Legacy SmartReader Connectivity
Instructions on configuring TrendReader 2
Troubleshooting
- SmartReader 9 Rate Select Connections
Setting the Rate Select jumpers for the SmartReader 9 Pulse Logger - Troubleshoot counting mode setup for SmartReader 9
How to force enable Accumulate mode in TrendReader 2 for the SmartReader 9 Pulse Logger - Troubleshooting Incorrect Readings
How to troubleshoot incorrect readings for SmartReader and SmartReader Plus data loggers - USB to Serial Adaptors - Installing Drivers
Installing Drivers for IC-102, LIC-102 and USB to Serial Adaptors - Reassigning COM Ports
Reassigning COM Ports by Accessing Device Manager


